top of page

Load data for .219 Zipper + .224 | 40gr | Nosler Varmageddon BTip

Recommended Powder(s): ADI AR 2207

.219 Zipper + .224 | 40gr | Nosler Varmageddon BTip

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | Nosler Varmageddon BTip
Manufacturer SKU:
17230
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.665" | 16.9mm
Caliber:
.219 Zipper load data
Case Length (l3):
1.933" | 49.1mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.372" | 9.4mm
Shank Seated Depth:
0.372" | 9.4mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
41336 psi | 2850 bar
LID:
LID_B3952_C58
Last updated:
2025-01-01

Load data for 26 loads in caliber .219 Zipper with .224 | 40gr | Nosler Varmageddon BTip bullet and 13 powders such as ADI AR 2207. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
85%
37101
90%
**37
99%
[Accurate 2015]*
<<locked>>
92%
35694
86%
**71
94%
[Accurate 2495]*
<<locked>>
97%
32126
78%
**61
92%
Alliant AR-Comp
<<locked>>
96%
35607
86%
**43
97%
Alliant Reloder-10x
<<locked>>
90%
37130
90%
**37
96%
[Baschieri & Pellagri 106]*
<<locked>>
86%
36782
89%
**82
93%
Hodgdon TrailBoss
<<locked>>
97%
29022
70%
**93
100%
IMR 4198
<<locked>>
88%
37057
90%
**87
96%
Norma 200
<<locked>>
85%
35868
87%
**87
96%
ReloadSwiss RS 14
<<locked>>
97%
28587
69%
**39
100%
Vihtavuori N120
<<locked>>
86%
36274
88%
**71
99%
Vihtavuori N130
<<locked>>
92%
36695
89%
**55
95%
[Vihtavuori N133]*
<<locked>>
97%
35114
85%
**99
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33025
80%
**32
98%
[Accurate 2015]*
<<locked>>
85%
28442
69%
**48
90%
[Accurate 2495]*
<<locked>>
93%
28253
68%
**43
90%
[Alliant AR-Comp]*
<<locked>>
86%
25715
62%
**82
90%
[Alliant Reloder-10x]*
<<locked>>
81%
27180
66%
**38
91%
[Baschieri & Pellagri 106]*
<<locked>>
82%
32053
78%
**54
90%
Hodgdon TrailBoss
<<locked>>
80%
22350
54%
**96
100%
[IMR 4198]*
<<locked>>
81%
29704
72%
**71
93%
[Norma 200]*
<<locked>>
81%
30864
75%
**40
94%
ReloadSwiss RS 14
<<locked>>
80%
22046
53%
**46
100%
Vihtavuori N120
<<locked>>
81%
31024
75%
**33
98%
[Vihtavuori N130]*
<<locked>>
82%
27108
66%
**59
90%
[Vihtavuori N133]*
<<locked>>
92%
30211
73%
**51
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page